EN/
Romana
![Reinforced Clutch Disc AISIN 240 mm Nissan [0]](https://gomagcdn.ro/domains2/patrolshop.ro/files/product/medium/disc-ambreiaj-kevlar-240x160-mm-nissan-479261.jpg "Reinforced Clutch Disc AISIN 240 mm Nissan [0]")
![Reinforced Clutch Disc AISIN 240 mm Nissan [1]](https://gomagcdn.ro/domains2/patrolshop.ro/files/product/medium/disc-ambreiaj-kevlar-240x160-mm-nissan-682426.jpg "Reinforced Clutch Disc AISIN 240 mm Nissan [1]")
![Reinforced Clutch Disc AISIN 240 mm Nissan [1]](https://gomagcdn.ro/domains2/patrolshop.ro/files/product/original/disc-ambreiaj-kevlar-240x160-mm-nissan-479261.jpg "Reinforced Clutch Disc AISIN 240 mm Nissan [1]")
![Reinforced Clutch Disc AISIN 240 mm Nissan [2]](https://gomagcdn.ro/domains2/patrolshop.ro/files/product/original/disc-ambreiaj-kevlar-240x160-mm-nissan-682426.jpg "Reinforced Clutch Disc AISIN 240 mm Nissan [2]")
Attention: This product is intended for off-road / sporting / recreational use and is not sold as a product approved for use on public roads. Use on public roads is at the customer's own risk and responsibility.
Delivery date: momentan neconfirmată
Product Code:
MK0203-0068
Do you need help?
+40730122006
- Description
Reinforced 240 mm clutch disc for Nissan Patrol Y60 and Y61 2.8 TD, based on a new AISIN clutch disc. The original friction linings are professionally replaced with high-performance material, while preserving the base disc's original thickness and mechanical construction.
Features
- Sprung hub for torsional vibration damping
- Friction material with high wear and thermal resistance
- Progressive engagement similar to a conventional clutch, based on Patrol Shop's practical experience
- Friction material used and tested by Patrol Shop for over 5 years in off-road, motorsport and modified vehicle applications
Specifications
- Base disc manufacturer: AISIN
- Nominal disc diameter: 240 mm
- Friction lining dimensions: 241x156 mm (outer/inner)
- Hub spline profile: 23x25.5 mm / 24 splines
- Hub type: Sprung, with torsional damper
- Friction material: Woven composite reinforced with aramid fibers
- Maximum continuous material operating temperature: 250°C
- Maximum intermittent material operating temperature: 350°C
- Disc thickness: Original AISIN disc thickness, retained after relining
Compatibility
- Nissan Patrol Y60 2.8 TD - RD28T, with a compatible clutch configuration
- Nissan Patrol Y61 2.8 TD - RD28Ti, with a compatible clutch configuration
Installation
- Verify compatibility with the flywheel, pressure plate and gearbox input shaft
- Inspect the flywheel friction surface and check its flatness before installation
- Follow the applicable clutch assembly installation requirements and keep the friction linings free from oil and grease contamination
Important: The stated temperatures apply to the friction material and are not certified operating limits for the complete clutch assembly. Torque transmission capacity also depends on the pressure plate, flywheel and operating conditions.
Similar products
